SalesforceWriter

Port type	Number	Required	Description	Metadata
Input	0	✓	For data records to be inserted, updated or deleted	input0
Output	0	⨯	For accepted data records	input0 plus ObjectId field
Output	1	⨯	For rejected data records	input0 plus Error message field

Port type

Number

Required

Description

Metadata

Input

✓

For data records to be inserted, updated or deleted

input0

Output

⨯

For accepted data records

input0 plus ObjectId field

Output

⨯

For rejected data records

input0 plus Error message field

If you do not map an error port and an error occurs, the component fails.

Metadata

SalesforceWriter propagates metadata from left to right.

The metadata on the right side on the first output port have an additional field ObjectId. If the operation is Upsert, the output metadata on the first output port also have an additional field Created.

The metadata on the right side on the second output port have an additional field Error.

Metadata cannot use Autofilling Functions.

SalesforceWriter Attributes

Attribute	Req	Description	Possible values
Basic
Connection	yes	A Salesforce connection. See Salesforce Connections.	e.g. MySFConnection
Salesforce object	yes	An object affected by an operation	e.g. Account
Operation		An operation performed on the Salesforce object	Insert (default) \| Update \| Upsert \| Delete
Input mapping		Mapping of fields to be inserted/updated/deleted in Salesforce	Map by name (default)
Output mapping		Mapping of successfully inserted/updated/deleted fields	Map by name (default)
Error mapping		Mapping of records that were not inserted/updated/deleted	Map by name (default)
Advanced
Upsert external ID field	(yes)	A field of object specified in Salesforce object which will be used to match records in the Upsert operation. Mandatory for the Upsert operation. Not used in any other operation.	e.g. Id
Batch size		Size of the batch. The default and maximum batch size is 200 records. In some cases, it is beneficial to reduce the batch size to a lower number, because for example, the APEX triggers exceed the 10s limit for the call and the whole write fails.	e.g. 150

Attribute

Req

Description

Possible values

Basic

Connection

yes

A Salesforce connection. See Salesforce Connections.

e.g. MySFConnection

Salesforce object

yes

An object affected by an operation

e.g. Account

Operation

An operation performed on the Salesforce object

Insert (default) | Update | Upsert | Delete

Input mapping

Mapping of fields to be inserted/updated/deleted in Salesforce

Map by name (default)

Output mapping

Mapping of successfully inserted/updated/deleted fields

Map by name (default)

Error mapping

Mapping of records that were not inserted/updated/deleted

Map by name (default)

Advanced

Upsert external ID field

(yes)

A field of object specified in Salesforce object which will be used to match records in the Upsert operation. Mandatory for the Upsert operation. Not used in any other operation.

e.g. Id

Batch size

Size of the batch. The default and maximum batch size is 200 records.

In some cases, it is beneficial to reduce the batch size to a lower number, because for example, the APEX triggers exceed the 10s limit for the call and the whole write fails.

e.g. 150

Details

Supported Operations

Insert - inserts new records

Update - updates existing records

Upsert - inserts or updates records

Delete - moves records to Recycle Bin.

According to the operation you have chosen, different output metadata in Input mapping are displayed in the transform editor.

SOAP or Bulk API

If you write less than 1,500-2,000 records, it is better to use SOAP API because it will use less API requests.

Writing Attachments

SalesforceWriter supports writing attachments. You can either receive the attachment from byte fields or read the attachment from files.

Both options are mutually exclusive. If both options are specified, reading the attachment from byte fields has a higher priority over reading the attachment from files.

Attachments from byte fields

The attachment can be read from the input metadata field of byte or cbyte data type. The field containing the attachment is to be mapped to byte field, e.g. Body field in Attachment object.

Attachments from files

To read attachments from files, map the field with file URL to a string field with the _FileURL suffix, which is below the corresponding byte field, e.g. Body_FileURL field in Attachment object.

You can map only one file per record. Wild cards in file names are not supported.

Notes and Limitations

When specifying Salesforce objects and fields, always use the API Name of the element.

SOAP API does not support HardDelete operation. If you need HardDelete operation, use SalesforceBulkWriter.

Limits introduced by Salesforce API

Single API soap call cannot contain more than 200 objects.

Single soap message cannot exceed 50MB (encoded as UTF-8).

The component attempts to bundle as many objects (records) as possible together into a single call to reduce the number of used API requests. In most cases, all 200 records will fit into the 50MB limit, so the component will need 1 API request for 200 records.

When writing very long text fields or attachments, it is possible that a smaller number of records will use all 50MB. In such a case, the component sends as many records as possible in every call but ensures that the soap message will not exceed 50MB limit. The rest of the records will be sent in another call. You don’t need to worry about sizing the messages yourself. If you want, you can monitor the bundling of records, as well. The number of records and expected size of the message is included in graph log on DEBUG level.

Usage of API calls

The component uses several API calls during its run:

Login
Describe schema of target object - to extract metadata
1 call per every 200 records or 50MB of data, whichever comes first

Examples

Inserting attachments received from byte fields

Inserting attachments from files

Inserting records

This example shows a basic use case with insertion of records.

Insert records with new contacts into Salesforce. Input data fields have the same field names as Salesforce data fields.

Solution

Connect input port of SalesforceWriter with data source.

Create a Salesforce connection.

In SalesforceWriter, fill in Connection and Salesforce object.

Attribute	Value
Connection	Connection from the second step
Salesforce object	Contact

Attribute

Value

Connection

Connection from the second step

Salesforce object

Contact

You do not have to specify the operation, as insert is the default one. You do not have to specify Input mapping, as metadata field names are the same as Salesforce field names and the default mapping (by name) is used.

You can attach an edge to the first output port to obtain object IDs of inserted records. You can attach an edge to the second output port to obtain records that have not been inserted.

Updating records

This example shows updating of Salesforce objects.

Punch Cards Ltd. has changed its name to United Floppies Ltd. Update the name in Account table/object.

Solution

Create a Salesforce connection, read ID of the company with SalesforceBulkReader, change the company name, update the record in Salesforce with SalesforceWriter.

Attribute	Value
Connection	Connection from the first step
Salesforce object	Account
Operation	Update
Input mapping	See the code below

Attribute

Value

Connection

Connection from the first step

Salesforce object

Account

Operation

Update

Input mapping

See the code below

//#CTL2

function integer transform() {
 	$out.0.Id = $in.0.Id;
 	$out.0.Name = "United Floppies Ltd.";

 	return ALL;
}

Upserting records

This example shows upserting records.

There is a list of contacts (name and last name) and new phone numbers. Update the phone numbers of the contacts. If there is no such contact, create a new one.

Solution

Read records from Contact table with SalesforceBulkReader. Join them with the records from the list. The result of join operation should contain only the records from the list. Write the records from the list only.

In SalesforceWriter, set Connection, Salesforce object, Operation and Input mapping.

Attribute	Value
Connection	Connection from the first step
Salesforce object	Contact
Operation	Upsert
Input mapping	See the code below
Upsert external ID field	Id

Attribute

Value

Connection

Connection from the first step

Salesforce object

Contact

Operation

Upsert

Input mapping

See the code below

Upsert external ID field

//#CTL2

function integer transform() {
 	$out.0.Id = $in.0.Id;
 	$out.0.FirstName = $in.0.FirstName;
 	$out.0.LastName  = $in.0.LastName;
 	$out.0.Phone     = $in.0.Phone;

 	return ALL;
}

Deleting records

This example shows deleting records.

A contact Ab C has been inserted by mistake. Delete the contact.

Solution

Create a Salesforce connection, read the contact ID with SalesforceBulkReader, and use the ID to delete it with SalesforceWriter.

In SalesforceWriter set Connection, Salesforce object and Operation.

Attribute	Value
Connection	Connection from the first step
Salesforce object	Contact
Operation	Delete

Attribute

Value

Connection

Connection from the first step

Salesforce object

Contact

Operation

Delete

Inserting attachments received from byte fields

This example shows writing attachments into Salesforce. The content of the file is received from a byte field of input port metadata.

Insert an attachment to Account 'Floppies United'.

Solution

Create a Salesforce connection.

Read ID of the 'Floppies United' account with SalesforceBulkReader.

Read the attachment with FlatFileReader into a byte field. The metadata on the output port on FlatFileReader uses EOF as delimiter; set record delimiter and default field delimiter as empty.

Merge the data streams with Combine.

Write the attachment with SalesforceWriter.

In SalesforceWriter, use the Connection, Salesforce object and Input mapping attributes.

Attribute	Value
Connection	Connection from the first step
Salesforce object	Attachment
Input mapping	See the code below.

Attribute

Value

Connection

Connection from the first step

Salesforce object

Attachment

Input mapping

See the code below.

//#CTL2

function integer transform() {
 	$out.0.ParentId = $in.0.Id;
 	$out.0.Body     = $in.0.FileContent;
 	$out.0.Name     = $in.0.FileName;

 	return ALL;
}

In SalesforceWriter you can read files to be uploaded directly. In the input mapping, map the URL of the file to the Body_FileURL field.

Inserting attachments from files

This example shows writing attachments to Salesforce. The content of the attachment is not received from byte fields, but read from files.

Input data to SalesforceWriter contains ContactID, Filename and the path to the file. Write the files to the Salesforce as attachments.

Solution

Create a Salesforce connection. In SalesforceWriter, set the Connection, Salesforce object and Input mapping attributes.

Attribute	Value
Connection	Connection from the first step
Salesforce object	Attachment
Input mapping	See the code below.

Attribute

Value

Connection

Connection from the first step

Salesforce object

Attachment

Input mapping

See the code below.

//#CTL2

function integer transform() {
	$out.0.ParentId = $in.0.id;
	$out.0.Name = $in.0.name;
	$out.0.Body_FileURL = $in.0.filename;

	return ALL;
}

Compatibility

Version	Compatibility Notice
4.4.0-M1	SalesforceWriter is available since 4.4.0-M1. It uses Salesforce SOAP API version 37.0.
4.5.0-M2	SalesforceWriter uses Salesforce SOAP API version 39.0.
4.5.0	You can now set batch size.
5.2.0	SalesforceWriter uses Salesforce SOAP API version 45.0.
5.3.0	SalesforceWriter uses Salesforce SOAP API version 46.1.
5.16.0	SalesforceWriter uses Salesforce SOAP API version 55.2.

Version

Compatibility Notice

4.4.0-M1

SalesforceWriter is available since 4.4.0-M1. It uses Salesforce SOAP API version 37.0.

4.5.0-M2

SalesforceWriter uses Salesforce SOAP API version 39.0.

4.5.0

You can now set batch size.

5.2.0

SalesforceWriter uses Salesforce SOAP API version 45.0.

5.3.0

SalesforceWriter uses Salesforce SOAP API version 46.1.

5.16.0

SalesforceWriter uses Salesforce SOAP API version 55.2.

{{{ highlightedName }}}