OracleBulkWriter

CloverDX Designer > Component Reference > Writers > OracleBulkWriter

Short Description

Ports

Metadata

OracleBulkWriter Attributes

Details

Example

Compatibility

Short Description

OracleBulkWriter loads data into Oracle database.

When to use OracleBulkWriter

This component requires installation and configuration of a database native client. The client must be installed on the same machine as CloverDX Server (when working in a server project) or CloverDX Designer (when working in a local project). Due to this overhead, we recommend using this component only if you require significantly higher loading performance than with DatabaseWriter which should be used in typical scenarios.

Data output	Input ports	Output ports	Transformation	Transf. required	Java	CTL	Auto-propagated metadata
database	0-1	0-1	⨯	⨯	⨯	⨯	⨯

Data output

Input ports

Output ports

Transformation

Transf. required

Java

CTL

Auto-propagated metadata

database

0-1

⨯

Ports

Port type	Number	Required	Description	Metadata
Input	0	^[1]	Records to be loaded into the database.	Any
Output	0	⨯	Rejected records	Input 0

Port type

Number

Required

Description

Metadata

Input

^[1]

Records to be loaded into the database.

Any

Output

⨯

Rejected records

Input 0

¹	If no file containing data for loading (Loader input file) is specified, input port must be connected.

Metadata

OracleBulkWriter does not propagate metadata.

It has no metadata templates.

Both ports must have the same metadata.

Input metadata has to have the same names as database table names. Otherwise, BD column names has to be used.

OracleBulkWriter Attributes

Attribute Req Description Possible values

Attribute	Req	Description	Possible values
Basic
Path to sqlldr utility	yes	The name of sqlldr utility, including the path.
TNS name	yes	TNS name identifier.	E.g. db.example.com
User name	yes	Username to be used when connecting to the Oracle database.
Password	yes	Password to be used when connecting to the Oracle database.
Oracle table	yes	The name of the database table into which the records should be loaded.
Advanced
Control script		Control script for the sqlldr utility. For more information, see Control Script.
Append		Specifies what should be done with the database table. For more information, see Append Attribute.	append (default) \| insert \| replace \| truncate
Log file name		The name of the file where the process is logged.	${PROJECT}/loaderinputfile.log
Bad file name		The name of the file where the records causing errors are written.	${PROJECT}/loaderinputfile.bad
Discard file name		The name of the file where the records not meeting selection criteria are written.	${PROJECT}/loaderinputfile.dis
DB column names		The names of all columns in the database table.	E.g. f1;f2;f3
Loader input file		The name of an input file to be loaded, including the path. For more information, see Loader Input File.
Max error count		The maximum number of allowed insert errors. When this number is exceeded, the graph fails. If no errors are to be allowed, the attribute should be set to 0. To allow all errors, set this attribute to a very high number.	50 (default) \| 0-N
Max discard count		The number of records that can be discarded before the graph stops. If set to 1, even single discarded record stops the graph run.	all (default) \| 1-N
Ignore rows		The number of rows of the data file that should be skipped when loading data to a database.	0 (default) \| 1-N
Commit interval		Conventional path loads only: Commit interval specifies the number of rows in the bind array. Direct path loads only: Commit interval identifies the number of rows that should be read from the data file before the data is saved. By default, all rows are read and data is all saved at once, at the end of the load.	64 (default for conventional path) \| all (default for direct path) \| 1-N
Use file for exchange		On Unix, a pipe transfer is used, by default. If it is set to `true` and Loader input file is not set, temporary file is created and used as data source. On Windows, a temporary file is created and used as data source, by default. However, since some clients do not need a temporary data file to be created, this attribute can be set to `false` for such clients.	false (default on Unix) \| true (default on Windows)
Parameters		All parameters that can be used as parameters by the sqlldr utility. These values are contained in a sequence of pairs of the following form: `key=value`, or `key` only (if the `key` value is the boolean `true`) separated from each other by a semicolon, colon, or pipe. If the value of any parameter contains a semicolon, colon, or pipe as its part, such value must be double quoted.
Fail on warnings		By default, the component fails on errors. By switching the attribute to `true`, you can make the component fail on warnings. Background: when an underlying bulk-loader utility finishes with a warning, it is just logged to the console. This behavior is sometimes undesirable, as warnings from underlying bulk-loaders may seriously impact further processing. For example, 'Unable to extend table space' may result in not loading all data records to a database; hence not completing the expected task successfully.	false (default) \| true

Basic

Path to sqlldr utility

yes

The name of sqlldr utility, including the path.

TNS name

yes

TNS name identifier.

E.g. db.example.com

User name

yes

Username to be used when connecting to the Oracle database.

Password

yes

Password to be used when connecting to the Oracle database.

Oracle table

yes

The name of the database table into which the records should be loaded.

Advanced

Control script

Control script for the sqlldr utility. For more information, see Control Script.

Append

Specifies what should be done with the database table. For more information, see Append Attribute.

append (default) | insert | replace | truncate

Log file name

The name of the file where the process is logged.

${PROJECT}/loaderinputfile.log

Bad file name

The name of the file where the records causing errors are written.

${PROJECT}/loaderinputfile.bad

Discard file name

The name of the file where the records not meeting selection criteria are written.

${PROJECT}/loaderinputfile.dis

DB column names

The names of all columns in the database table.

E.g. f1;f2;f3

Loader input file

The name of an input file to be loaded, including the path. For more information, see Loader Input File.

Max error count

The maximum number of allowed insert errors. When this number is exceeded, the graph fails. If no errors are to be allowed, the attribute should be set to 0. To allow all errors, set this attribute to a very high number.

50 (default) | 0-N

Max discard count

The number of records that can be discarded before the graph stops. If set to 1, even single discarded record stops the graph run.

all (default) | 1-N

Ignore rows

The number of rows of the data file that should be skipped when loading data to a database.

0 (default) | 1-N

Commit interval

Conventional path loads only: Commit interval specifies the number of rows in the bind array. Direct path loads only: Commit interval identifies the number of rows that should be read from the data file before the data is saved. By default, all rows are read and data is all saved at once, at the end of the load.

64 (default for conventional path) | all (default for direct path) | 1-N

Use file for exchange

On Unix, a pipe transfer is used, by default. If it is set to true and Loader input file is not set, temporary file is created and used as data source. On Windows, a temporary file is created and used as data source, by default. However, since some clients do not need a temporary data file to be created, this attribute can be set to false for such clients.

false (default on Unix) | true (default on Windows)

Parameters

All parameters that can be used as parameters by the sqlldr utility. These values are contained in a sequence of pairs of the following form: key=value, or key only (if the key value is the boolean true) separated from each other by a semicolon, colon, or pipe. If the value of any parameter contains a semicolon, colon, or pipe as its part, such value must be double quoted.

Fail on warnings

By default, the component fails on errors. By switching the attribute to true, you can make the component fail on warnings. Background: when an underlying bulk-loader utility finishes with a warning, it is just logged to the console. This behavior is sometimes undesirable, as warnings from underlying bulk-loaders may seriously impact further processing. For example, 'Unable to extend table space' may result in not loading all data records to a database; hence not completing the expected task successfully.

false (default) | true

Details

OracleBulkWriter loads data into a database using Oracle database client. It can read data through the input port or from an input file. If the input port is not connected to any other component, data must be contained in an input file that should be specified in the component. If you connect some other component to the optional output port, rejected records are sent to it.

OracleBulkWriter's functionality depends on the sqlldr utility. Oracle sqlldr database utility must be installed on the computer where CloverDX runs.

See details on sqlldr utility: Loading data into an Oracle database with SQL*Loader

One of the common issues with the component functionality is the missing tnsnames.ora configuration. For more information about the proper configuration of the file, see Configuring Tnsnames.ora.

OracleBulkWriter is a bulk loader suitable for uploading many records to a database. To insert several records, you can also use DatabaseWriter, which does not require the sqlldr utility.

Control Script

Control script for the sqlldr utility.

If specified, both the Oracle table and the Append attributes are ignored. Must be specified if input port is not connected. In such a case, Loader input file must also be defined.
If Control script is not set, default control script is used.

Example 34. Example of a Control script

LOAD DATA
INFILE *
INTO TABLE test
append
(
    name TERMINATED BY ';',
    value TERMINATED BY '\n'
)

Append Attribute

Append (default)

Specifies that data is simply appended to a table. Existing free space is not used.
Insert

Adds new rows to the table/view with the INSERT statement. The INSERT statement in Oracle is used to add rows to a table, the base table of a view, a partition of a partitioned table or a subpartition of a composite-partitioned table, or an object table or the base table of an object view.

An INSERT statement with a VALUES clause adds to the table a single row containing the values specified in the VALUES clause.

An INSERT statement with a subquery instead of a VALUES clause adds to the table all rows returned by the subquery. Oracle processes the subquery and inserts each returned row into the table. If the subquery selects no rows, Oracle inserts no rows into the table. The subquery can refer to any table, view, or snapshot, including the target table of the INSERT statement.
Update

Changes existing values in a table or in a view’s base table.
Truncate

Removes all rows from a table or cluster and resets the STORAGE parameters to the values when the table or cluster was created.

Loader Input File

Name of input file to be loaded, including path.

If it is not set, a loader file is created in CloverDX or OS temporary directory (on Windows) (unless Use file for exchange is set to false) or named pipe is used instead of temporary file (in Unix). The created file is deleted after the load finishes.
If it is set, specified file is created. The created file is not deleted after data is loaded and it is overwritten on each graph run.
If the input port is not connected, this file must be specified, must exist and must contain data that should be loaded into database. At the same time, Control script must be specified. The file is not deleted nor overwritten.

Notes and Limitations

OracleBulkWriter does not support writing lists and maps.

Example

Load records (fields username, surname) into database table users2. The Oracle database is installed on bd.example.com and listens on 1521. Database login smithj and password MySecretPassword.

Solution

Install sqlldr utility, if it is not installed.

Set up the following attributes of the component:

Attribute	Value
Path to sqlldr utility	/app/product/12.1.0/client_1/bin/sqlldr
TNS name	db.example.com
User name	smithj
Password	MySecretPassword
Oracle table	users2

Attribute

Value

Path to sqlldr utility

/app/product/12.1.0/client_1/bin/sqlldr

TNS name

db.example.com

User name

smithj

Password

MySecretPassword

Oracle table

users2

Metadata field names have to match database table field names.

Case 2: database table has columns user and surn.

Set up attribute DB Column names to user;surn.

Compatibility

Version	Compatibility Notice
5.3.0	OracleDataWriter was renamed to OracleBulkWriter.

Version

Compatibility Notice

5.3.0

OracleDataWriter was renamed to OracleBulkWriter.

{{{ highlightedName }}}