Version

    HTTPConnector

    HTTPConnector 64x64

    Short Description

    Ports

    Metadata

    HTTPConnector Attributes

    Details

    Examples

    Best Practices

    Compatibility

    See also

    Short Description

    HTTPConnector sends HTTP requests to a web server and receives responses. The request is written in a file or in the graph itself or it is received through a single input port. The response can be sent to an output port, stored to a specified file or stored to a temporary file. The path to the file can then be sent to a specified output port.

    Same input metadata Sorted inputs Inputs Outputs Each to all outputs Java CTL Auto-propagated metadata

    -

    ⨯

    0-1

    0-2

    -

    ⨯

    ⨯

    ✓

    Ports

    Port type Number Required Description Metadata

    Input

    0

    ⨯

    For setting various attributes of the component

    Any

    Output

    0

    ⨯

    For a response content, response file path, status code, component attributes…​

    Any

    1

    ⨯

    For error details

    Any

    Metadata

    HTTPConnector does not propagate metadata.

    HTTPConnector has metadata templates on its ports available.

    You do not have to use metadata templates on input and output edges.

    See general details on metadata templates.

    Input
    Table 76. HTTPConnector_Request
    Field number Field name Data type

    1

    URL

    string

    2

    requestMethod

    string

    3

    addInputFieldsAsParameters

    boolean

    4

    addInputFieldsAsParametersTo

    string

    5

    ignoredFields

    string

    6

    additionalHTTPHeaderProperties

    string

    7

    charset

    string

    8

    requestContent

    string

    9

    requestContentByte

    byte

    10

    inputFileURL

    string

    11

    outputFileURL

    string

    12

    appendOutput

    boolean

    13

    authenticationMethod

    string

    14

    username

    string

    15

    password

    string

    16

    consumerKey

    string

    17

    consumerSecret

    string

    18

    keyStore

    string

    19

    keyStorePassword

    string

    20

    keyAlias

    string

    21

    keyPassword

    string

    22

    trustStore

    string

    23

    trustStorePassword

    string

    24

    storeResponseToTempFile

    boolean

    25

    temporaryFilePrefix

    string

    26

    multipartEntities

    string

    27

    rawHTTPHeades

    string[]

    28

    oAuth2AccessToken

    string
    Output
    Table 77. HTTPConnector_Response
    Field number Field name Data type Description

    1

    content

    string

    The content of the HTTP response as a string. This field will be null, if the response is written to a file.

    2

    contentByte

    byte

    The raw content of the HTTP response as an array of bytes. This field will be null, if the response is written to a file.

    3

    outputFilePath

    string

    The path to a file, where the response has been written. Will be null, if the response is not written to a file.

    4

    statusCode

    integer

    An HTTP status code of the response.

    5

    header

    map[string,string]

    A map representing HTTP header properties from response.

    6

    rawHeaders

    string[]

    7

    errorMesage

    string

    An error message, in case that the error output is redirected to a standard output port.
    Table 78. HTTPConnector_Error
    Field number Field name Data type Description

    1

    errorMessage

    string

    Error message

    HTTPConnector Attributes

    Attribute Req Description Possible values

    Basic

    URL

    [1]

    A URL of the HTTP server the component connects to. May contain one or more placeholders in the following form: *{<field name>}. For the URL format, see Reading of Remote Files. The HTTP, HTTPS, FTP and SFTP protocols are supported. Connecting via a proxy server is available, too, for example: http:(proxy://proxyHost:proxyPort)//www.domain.com.

    Request method

    Method of request.

    GET (default) | POST | PUT | PATCH | DELETE | HEAD | OPTIONS | TRACE

    Add input fields as parameters

    Specifies whether additional parameters from the input edge should be added to the URL. Note: When parameters are read from the input edge and put to the query string, they can contain special characters (?, @, :, etc.). Do not replace such characters with %-notation, HTTPConnector automatically makes them URL-encoded This feature was introduced in CloverDX 3.3-M3 and causes backwards incompatibility.

    false (default) | true

    Send parameters in

    Specifies whether input fields should be added to the query string or method body. Parameters can only be added to the method body in case that Request method is set to POST.

    QUERY (default) | BODY

    Ignored fields

    Specifies which input fields are not added as parameters. A list of input fields separated by a semicolon is expected.

    Additional HTTP headers

    Additional properties of the request that will be sent to the Server. A dialog is used to create it, the final form is a sequence of key=value pairs separated by a comma and the whole sequence is surrounded by curly braces. The value may refer to a field or parameter using a ${fieldName} or ${parameterName} notation.

    Multipart entities

    Specifies fields, that should be added as multipart entities to a POST request. Field name is used as an entity name. A list of input fields separated by a semicolon is expected.

    Request/response charset

    Character encoding of the input/output files

    The default encoding depends on DEFAULT_CHARSET_DECODER in defaultProperties.

    UTF-8 | other encoding

    Request content

    The request content defined directly in a graph. Can also be specified as the Input file URL or using the requestContent or requestContentByte fields in the Input mapping.

    Input file URL

    A URL of a file from which a single HTTP request is read. See URL File Dialog.

    Output file URL

    A URL of a file to which an HTTP response is written. See URL File Dialog. The output files are not deleted automatically and must be removed manually or as a part of the transformation.

    Append output

    By default, any new response overwrites the older one. If you switch this attribute to true, the new response is appended to the old ones. Is applied to output files only.

    false (default) | true

    Input Mapping

    Allows to set various properties of the component by mapping their values from an input record.

    Output Mapping

    Allows to map response data (like a content, status code, etc. ) to the output record. It is also possible to map values from input fields and error details (if Redirect error output is set to true).

    Error Mapping

    Allows to map an error message to the output record. It is also possible to map values from input fields and attributes.

    Redirect error output

    Allows to redirect error details to a standard output port.

    false (default) | true

    Security

    Authentication method

    Specifies which authentication method should be used.

    HTTP BASIC (default) | HTTP DIGEST | ANY

    Username

    A username required to connect to the server.

    Password

    A password required to connect to the server.

    OAuth1 Consumer key

    A consumer key associated with a service. Defines the access token (2-legged OAuth) for signing requests - together with OAuth Consumer secret.

    OAuth1 Consumer secret

    A consumer secret associated with a service. Defines the access token (2-legged OAuth) for signing requests - together with OAuth Consumer key.

    OAuth1 Access Token

    [2]

    An additional field used during OAuth authentication.

    OAuth1 Access Token secret

    [2]

    An additional field used during OAuth authentication.

    OAuth1 Signature method

    [3]

    Algorithm for signing OAuth message. The HMAC-SHA1 and HMAC-SHA256 methods are supported.

    OAuth1 realm

    [3]

    An additional field used during OAuth authentication. Some providers may ignore it.

    OAuth2 connection

    [3]

    OAuth2 connection used to obtain access token. No additional configuration is necessary, token will be refreshed automatically when necessary.

    Key store

    [4]

    Path to the key store which contains the key pair for client certificate authentication. Leave empty to use the JVM default key store.

    Key store password

    [4]

    The password for the Key store.

    Key alias

    [4]

    Selects a key from the Key store. If not set, the first key will be used.

    Key password

    [4]

    The password for the selected client key. If not set, Key store password is used.

    Trust store

    [4]

    Path to the trust store which contains certificates of trusted servers and certification authorities. Leave empty to use the JVM default trust store.

    Trust store password

    [4]

    The password for the Trust store.

    Disable SSL Certificate Validation

    Disables certificate validation of the page you are connecting to. Use this attribute only if you know, what you are doing. Available since CloverDX 4.1.0-M1.

    Advanced

    Raw HTTP Headers

    [5]

    Additional user-defined HTTP headers defined as text.

    e.g. Pragma: no-cache

    Request Cookies

    Define cookies to be send in an HTTP request. The values of cookies can be set up in Input mapping.

    Response Cookies

    Define names of response cookies to be used. The mapping can be set up in Output mapping. The names of particular cookies are separated by a semicolon.

    E.g. cookie1;cookie2

    Store HTTP response to file

    [6]

    If this attribute is switched to true, a response is written to temporary files with a prefix specified in the Prefix for response names attribute. The path to these temporary files can be retrieved using Output Mapping. Storing a response to temporary files is necessary in case the response body is too large to be stored in a single string data field. The temporary files are deleted automatically after graph finishes (if it has not run in Debug mode).

    false (default) | true

    Prefix for response files

    A prefix that will be used in the name of each output file with an HTTP response. To this prefix, distinguishing numbers are appended.

    "http-response-"

    (default) | other prefix

    Stream input file

    If the request content is specified by the Input file URL attribute, the input file is uploaded using chunked transfer encoding.

    Set the attribute to false to disable streaming.

    true (default) | false

    Request parameters

    Set up a parameter that has a different name from the field name in the metadata. It enables usage of parameters having names that cannot be used as metadata field names (e.g start-date).

    Timeout

    How long the component waits to get a response. If it does not receive a response within a specified limit, the execution of the component fails. The HTTPConnector has one minute timeout by default.

    Timeout is in milliseconds. Different time units can be used. See Time Intervals.

    60000 (default)

    Retry Count

    How many times should the component retry a request in the case of a failure.

    Note that the failure does not mean a response status code different from 2xx. A failure is meant same as when component uses error port. Component consider a failure if it cannot process the request/response, i.e. IOException. If it processes the request and gets response with an error status code (e.g. 500), it is not a failure.

    0 (default)

    Retry Delay

    How long should the component wait before retrying a request. If the component retries a request it will wait additional time to retrying it. The parameter is list of integers, that are separated by comma. Retry delay is in seconds. If the number of retries is higher than the size of a list, then the last delay in the list is used.

    0 (default)

    Deprecated

    URL from input field

    [1]

    The name of a string field specifying the target URL you wish to retrieve. The field value may contain placeholders in the form *{<field name>}. For the URL format, see Reading of Remote Files. The HTTP, HTTPS, FTP and SFTP protocols are supported.

    Input field

    [6]

    The name of the field of input metadata from which the request content is received. Must be of string data type. May be used for multi HTTP requests.

    Output field

    The name of the field of output metadata to which the response content is sent. Must be of string data type. May be used for multi HTTP responses.
    1

     A URL must be specified by setting one of the URL or URL from field attributes or mapping it in the Input mapping.
    2

     Available since release 3.5.
    3

     Available since release 5.12.
    4

     Available since release 5.7.
    5

     Available since release 3.3.
    6

     The response can be stored either in a file specified in Output file URL or in a temporary file (when Store response file URL to output field is set to true) - it is not possible to use both options.

    Details

    Input Mapping

    Multipart entities

    Output Mapping

    Error mapping
    Input Mapping

    Editing the Input mapping attribute opens the Transform Editor where you can decide which component attributes should be set using the input record.

    HTTPConnectorComponent inputMapping
    Figure 469. Transform Editor in HTTPConnector

    The dialog provides you with all the power and features known from Transform Editor and CTL.

    All kinds of CTL functions are available to modify the input field value to be used.
    Multipart entities

    Since CloverDX 3.5.4, you can set up multipart entities in the transform editor. Input mapping now offers new fields derived from the value of the Multipart entities attribute. For example, field1;field2 as the value of multipart entities generates the following fields.

    HTTPConnector multipart entities 010
    Figure 470. Multipart entities in input mapping

    The generated fields can be used to control multipart entities.

    If you deal with Multipart entities, you have to use the POST method. When specifying a Multipart entity, an additional Content-type HTTP header containing "multipart/form-data" in its value will be added to the HTTP request automatically. Moreover, boundaries will be specified and distributed automatically in the HTTP request as well. Configuring the Content-type HTTP header as "multipart/form-data" manually will break the automatic boundary specification.

    Possible ways of configuration of multipart entities

    List of input fields

    Map content of multipart entity

    Map content and filename

    Use file as multipart entity
    List of input fields

    Compatible with previous versions. The Multipart entities attribute contains a semicolon separated list of fields from the input record. Each field is a multipart entity. The name is same as the field name, the field value is used as a content.

    Map content of multipart entity

    Use input mapping to set a content of multipart. The multipart name will be same as the fieldname and the content will be specified by a mapping.

    Map content and filename

    The multipart content will be used by the mapping, but there will be an additional multipart header in the request using the filename as mapped.

    Example 55. CTL Mapping and multipart entities

    The CTL mapping

    function integer transform() {
    $out.4.field1_EntityContent="My custom content";
    $out.4.field1_EntityFileNameAttribute="MyFilename";
    returnALL;
}

    produces following multipart content.

    ­­CB5PZVJDq5RyTWoZqxvtjlbVM0CrMa3Mt
Content­Disposition: form­data; name="field1"; filename="MyFilename"
Content­Type: text/plain; charset=UTF­8
Content­Transfer­Encoding: 8bit

My custom content
­­CB5PZVJDq5RyTWoZqxvtjlbVM0CrMa3Mt
    Use file as multipart entity

    To use files as multipart entities, map only the *_File field. Do not map the _Content field.

    $out.3.field3_EntitySourceFile = "${PROJECT}/workspace.prm";

    This will upload the file workspace.prm as a multipart entity.

    ­­3xEKe3wUSOl2cRnjwh1UsPVnDOoL7D
Content­Disposition: form­data; name="field3"; filename="workspace.prm"
Content­Type: application/octet­stream
Content­Transfer­Encoding: binary

... [here is content of file]

­­3xEKe3wUSOl2cRnjwh1UsPVnDOoL7D­­

    The file can be specified by a URL similar to the fileURL attribute in readers. But it cannot use the port reading or dictionary reading.

    Output Mapping

    Editing the attribute opens the Transform Editor where you can decide what should be sent to an output port.

    HTTPConnectorComponent outputMapping
    Figure 471. Transform Editor in HTTPConnector

    The dialog provides you with all the power and features known from Transform Editor and CTL.

    To do the mapping in a few basic steps:

    1. Provided you already have some output metadata, just left-click an item in the left-hand pane and drag it onto an output field. This will send the result data to the output.

    2. If you do not have any output metadata:

      1. Drag a Field from the left pane and drop it into the right pane (an empty space).

      2. This produces a new field in the output metadata.

    You can map various data to the output port:

    • Values of fields from input metadata - you can send values from input fields to the output port. This is mainly useful, when you are using some kind of a session identifier for HTTP requests.

    • Result - provides result data. These includes:

      • content - the content of the HTTP response as a string. This field will be null if the response is written to a file.

      • contentByte - the raw content of the HTTP response as an array of bytes. This field will be null if the response is written to a file.

      • outputFilePath - the path to a file, where the response has been written. Will be null if the response is not written to a file.

      • statusCode - the HTTP status code of the response.

      • header - the map representing HTTP header properties from the response.

      • rawHeaders - headers of the response.

      • errorMessage - the error message in case that the error output is redirected to a standard output port.

    • Attributes - provides values of the component attributes:

      • URL - the URL where the request has been sent.

      • requestMethod - the method that was used for the request.

      • requestContent - the content of the request, that has been sent (if specified as a string).

      • inputFileUrl - a URL of the file containing the request content.

    Output mapping uses CTL (you can switch to the Source tab). All kinds of functions are available to modify the value to be stored in the output field.

    $out.0.prices = find($in.1.content, "price: .*? USD")

    finds all occurrences of the form price: [some text] USD in the response content.

    If you let output mapping empty, the default output mapping is used:

    $out.0.* = $in.0.*;
$out.0.* = $in.1.*;

    The default mapping has been introduced in version 4.1.0.

    Error mapping

    Editing the Error mapping attribute opens the Transform Editor where you can map error details to an output port. The behavior is very similar to the Output mapping

    If you let error mapping empty, the default error mapping is used:

    $out.1.* = $in.0.*;
$out.1.* = $in.1.*;

    The default mapping has been introduced in version 4.1.0.

    Notes

    When the graph’s log level is set to DEBUG, the HTTPConnector prints the HTTP request and response to graph log.

    Examples

    Downloading a Web Page

    Downloading Document Requiring HTTP Authentication

    Connecting via HTTP Proxy without Password

    Connecting via HTTP Proxy using Password

    Using OAuth in HTTPConnector

    Upload a File using Multipart Entities

    Using Connection Timeout and Retry Count
    Downloading a Web Page

    Download the content of the web page www.cloverdx.com using HTTPConnector. Save the result to the file for further processing.

    Solution

    Use the URL and Output file URL attributes. The downloaded page will be saved into the result.html file in the ${DATAOUT_DIR} directory.

    Attribute Value

    URL

    http://www.cloverdx.com/

    Output file URL

    ${DATAOUT_DIR}/result.html
    Downloading Document Requiring HTTP Authentication

    Download a document from https://protected.example.org/document.html. The site requires HTTP basic authentication.

    Solution

    Set up the URL, Output file URL, Username and Password attributes. We suggest to use secure parameters to store your password.

    Attribute Value

    URL

    https://protected.example.org/document.html

    Output file URL

    ${DATAOUT_DIR}/document.html

    Username

    myUserName

    Password

    ${PASSWORD}

    An alternative solution is to connect an edge to the first output port instead of filling the Output file URL attribute. The result will be send to the edge. No output mapping is necessary.

    Connecting via HTTP Proxy without Password

    Download the content of the page http://www.cloverdx.com/. The page is accessible via proxy on 10.0.3.5 listening on TCP port 3128.

    Solution

    Use the URL attribute. You can use Output file URL to write a result to a file, or connect an output edge.

    Attribute Value

    URL

    http:(proxy://10.0.3.5:3128)//www.cloverdx.com/

    Output file URL

    ${DATAOUT_DIR}/result.html

    Note: The proxy may introduce some limitations. For example, it may deny you to connect via HTTPS, etc.

    Connecting via HTTP Proxy using Password

    The problem to be solved is similar to the previous example. The difference is that proxy requires a username (test) and password (securePassword).

    Solution
    Attribute Value

    URL

    http:(proxy://test:securePassword@10.0.3.5:3128)//www.cloverdx.com/

    Output file URL

    ${DATAOUT_DIR}/result.html
    Using OAuth in HTTPConnector

    Connect to Twitter API and get some tweets about Java.

    Solution

    Use the URL, OAuth Consumer key, OAuth Consumer secret, OAuth Access Token and OAuth Access Token secret attributes.

    Connect an edge to the first output port to pass results by the edge or fill in the Output file URL attribute to write down results to a file.

    Attribute Value

    URL

    https://api.twitter.com/1.1/search/tweets.json?q=java&count=20

    OAuth Consumer key

    yYjLhENks7mNlt7k4l2hKuHXP

    OAuth Consumer secret

    OE1dkaadjJR8LSOFFlakeH4YRlLkaiqnvVlSlAxZmNlrtoHpyI

    OAuth Access Token

    3062213700-IJNdsaG3e4vwUasoro4T5p5V2aOxEwYasvrlVs3

    OAuth Access Token secret

    S2hl7ivynvXI69kzky7Fx3ZJ84ZBCK6vt2G7bW3TFNTO7

    Note: The credentials in this example are not valid, you have to use your own credentials.

    Upload a File using Multipart Entities

    Send a file using multipart entities. The file content is available in field1 field.

    Solution

    Use the URL, Request method, Multipart entities and Input mapping attributes.

    Attribute Value

    URL

    http://www.example.com/

    Request method

    POST

    Add input fields as parameters

    true

    Multipart entities

    field1

    Input mapping

    See the code below

    		 
    function integer transform() {
    $out.4.field1_EntityContent = $in.0.field1;

    return ALL;
}

    Map multipart entities in the Input mapping dialog.

    Using Connection Timeout and Retry Count

    Connect to www.my-sometimes-responding-server.com which sometimes fails to respond. The response has to be returned within 20 seconds, otherwise connection should be considered as nonresponding. Make at most 5 attempts in total.

    Solution

    Use Timeout to set up time limit on connection to avoid waiting if server does not reply. If server responds sometimes only, use Retry count to ask several times.

    Attribute Value

    URL

    http://www.my-sometimes-responding-server.com/

    Request method

    GET

    Timeout

    20s

    Retry count

    4

    Timeout is in milliseconds. If you need to set it in seconds, minutes, hours, etc., add the unit. See Time Intervals. Retry count set to 4 causes up to 4 additional retries (if necessary). At most five requests are performed in total.

    Best Practices

    We recommend users to explicitly specify Request/response charset.

    Compatibility

    Version Compatibility Notice

    3.3.0-M3

    It is no longer necessary to encode field values used as Query parameters before passing them to HTTPConnector - they are encoded automatically. This, however, breaks backward compatibility, so be aware of this fact.

    It is now possible to use Output mapping to retrieve path to an output file, when the response is stored to a file (whether it is stored to temporary file or user-specified file). The file path is no longer sent to an output port automatically (as was the case for temporary files).

    3.5.4

    You can now map file as a multipart entity. You can map multipart entities in transform editor too.

    4.1.0-M1

    You can now disable SSL Certificate validation.

    4.1.0

    You can now set up Timeout and Retry count.

    Default output mapping or error mapping is now used if output mapping or error mapping is not defined.

    5.7.0

    You can now specify Key store, Key store password, Key alias, Key password, Trust store and Trust store password.

    See also

    WebServiceClient

    Common Properties of Components

    Specific Attribute Types

    Others Comparison