Validator

Port type	Number	Required	Description	Metadata
Input	0	✓	Input data records to be validated.	Any
Output	0	✓	Data records that passed the validation.	Based on Input 0.^[1]
Output	1	⨯	An optional output port with data that failed to validate.^[2]	Any
^[1] Metadata of validated fields can contain more specific data type than input. For example, input metadata can contain a string field with date values and corresponding field on the first output port can have date as its field type. After validating that the string value is a date, Validator can convert the value to the date type. ^[2] Metadata on the second output port can be enriched with fields containing details of validation failure. Available fields are listed in Error output mapping.

Validator Attributes

Attribute	Req	Description	Possible values
Basic
Validation rules	^[1]	Setup of rules used by validation. See Validator rules editor
Validation rules URL	^[1]	An URL to external file describing validation rules. Use exclusively this field or previous one.	${PROJECT}/validator
Error output mapping	⨯	Field mapping for error output port. See Error output mapping
^[1] Either Validation rules or Validation rules URL must be filled in.

Details

Validator allows you to specify a set of rules and check the validity of incoming data based on these rules. Validation rules can check various criteria like date format, numeric value, interval match, phone number validity and format, etc.

The component sends validated data to the first output port. The first output port has the same metadata as the input port with the exception of validated fields that can have output metadata modified to a more specific data type.

Data that failed to validate are sent to the second output port. When metadata on the second output port are the same as the metadata on the input port, invalid records are automatically sent to this output port. The second output port can be enriched with details of validation failure.

Validator rules editor

Validator rules editor provides all the power and features needed to set up validation rules. There are two tabs enabling to set up validation rules using different approaches: Use the Rules tab providing graphical interface to setup validation rules or switch to the Code tab with text editor and type rules by hand in form of xml.

The Rules tab of the dialog is split up into three parts: Available rules, Active rules and Rule parameters.

Tab Code contains a text editor for editing validation rules in XML form, options to import and export of the validation rules, and an option to return to initial state of validation rules.

Figure 62.3. Validator rules editor

Validation rules

Validation rules are the cornerstone of Validator. A validation rule is an evaluable condition that needs to be fulfilled to ensure that the field being validated contains a valid value. The evaluation of the condition if affected by corresponding environment settings.

	Example of validation rule
Check field value to contain decimal number. The condition is for the input field value to be a decimal number. The evaluation of condition is affected by locale setting specifying number format.

Example of validation rule

Check field value to contain decimal number.

The condition is for the input field value to be a decimal number. The evaluation of condition is affected by locale setting specifying number format.

For description of particular available validation rules, see Available rules.

Active rules

The Active rules pane contains a tree of active validation rules. The rules can be added to the tree from list of Available rules on the left side.

A group named as All rules is the root of the tree of active validation rules. If any of active validation rules is chosen, the details of the rule settings are displayed in rule parameters below.

Figure 62.4. Validator - Active rules

	Important
	In the case of more validation rules having the same output field, the value acquired from the last one is used.

	Tip
	The new active validation rule can also be added by pressing the + button above validation tree.

Select rule type

If you drag a field from metadata and drop it onto any of groups from active rules or between the rules of the group, the Select rule type dialog will appear. The dialog enables you to choose available rule to be added into group of rules. The added rule will be applied to preselected metadata field.

	Tip
	Use filter to find the rule by name.

Rule parameters

Each validation rule is configurable by several parameters. The parameters are split up in to groups for better lucidity.

There are Basic parameters, Locale and format settings and Common parameters.

Basic parameters

Most of basic parameters are rule specific parameters. See Available rules.

Locale and format settings

Validation rules can be affected by locale and format settings. These settings are inherited from the parent group, by default.

Parameter name	Parameter description	Value example
Trim input	Trims ASCII control characters (0-31) and Unicode whitespace from beginning and end of the processed field. Note: this is different from CTL function trim (trim) that only removes ASCII control characters (0-31).	True
Strict Validation	Enables a strict date format validation. The strict validation parses the date, formats the date and compares the result with input value. Validation with strict validation is 25% slower than non-strict. Available since CloverDX 4.1.	False
Number format mask	See Numeric Format.	#.###
Date format mask	See Date and Time Format.	yyyy-MM-dd
Locale	See Locale.	en.US
Timezone	See Time Zone.	Europe/London

Common parameters

Common parameters are present for all rules.

Parameter name	Parameter description	Value example
Rule type	Name of the rule from available rules list.	Interval
Rule name	User-defined rule name	My interval rule
Enabled	Rule can be disabled by unchecking of the button. The same functionality is provided by checkbox in column Enabled on a corresponding line in the list of active rules.	True
Description	User defined message. For example, it can contain the description of purpose of the rule.	Checks validity of a product code against the list of products available since January 2001.

Error output mapping

Error output mapping provides a setup of mapping of fields to an optional second output port.

If the second output port has the same metadata as the input port, no additional error output mapping is needed and the fields not passing the validation will be redirected to the second output port. In this case, the Validator works in the same way as Filter. See Filter.

Validator provides much more functionality than Filter. Validator enables you to get detailed information, why validation of particular record fails and error output mapping provides graphical interface to map fields with validation failure details to corresponding metadata fields on the second output port.

Validation failure details from following fields can be used. The fields can be seen as an additional secondary input port and error output mapping enables you to set up output mapping for the fields like in the reformat component. See Reformat.

Field name	Data type	Description
recordNo	long	The number of a record in the incoming data. Records are being numbered from 1.
validationMessage	string	A message describing the reason of the validation failure.
ruleStatusCode	integer	A unique error code identifier.
ruleName	string	The name of the validation rule that failed.
ruleType	string	The general rule name (e.g. Date, Number, String Length)
rulePath	string[]	A rule path in the validation rules tree.
validatedFieldNames	string[]	The names of the fields being validated by the rule.
validatedValues	map[string,string]	Values of fields being validated.
ruleParameters	map[string,string]	Rule parameters
validationDate	date	Date of processing of data using the Validator component.
componentID	string	Identifier of the component in the graph.
componentName	string	The name of the component.
graphURL	string	A path to a graph.

Figure 62.5. Validator - Error output mapping

Validator error codes

Validator error codes for particular available validation rules are listed in following table.

Table 62.3. Validator error codes

Rule status code	Rule type	Description	Validation message
101	Empty/Nonempty field	Input field is empty, expected to be nonempty.	Input field is empty, expected to be nonempty.
102	Empty/Nonempty field	Input field is nonempty, expected to be empty.	Input field is nonempty, expected to be empty.
201	Empty/Nonempty subset	Reported when higher than allowed number of fields was empty	value specific
202	Empty/Nonempty subset	Reported when lower than allowed number of fields was empty	value specific
302	Is Date	Reported when the string cannot be parsed as date	value specific
402	Is Number	Reported when the value cannot be parsed as a number	value specific
404	Is Number	Reported when parsed value is out of decimal precision	value specific
501	String Length	Reported when input string is too short	String is too short
502	String Length	Reported when input string is too long	String is too long
602	Pattern Match	Reported when the input value does not match the pattern	value specific
703	Enum Match	Input value couldn't be converted to data type this rule works with	Conversion of record field value failed.
704	Enum Match	Input value did not match any of the enum values	No match.
802	Interval	Conversion of value from record failed.	Conversion of value from record failed.
805	Interval	Incoming value not in given interval.	Incoming value not in given interval.
902	Comparison	Conversion failed.	Conversion failed.
904	Comparison	Incoming value did not meet the condition.	Incoming value did not meet the condition.
1003	Lookup	Record match found in lookup.	Record match found in lookup.
1004	Lookup	No matching record in lookup.	No matching record in lookup.
1101	Custom user rule	Rule function returned false	value specific
1102	Custom user rule	Error during execution of custom CTL2 code	value specific
1301	E-mail Address	Reported when email address couldn't be successfully parsed	value specific
1302	E-mail Address	Reported when there's a name part specified in the email address like <John Doe>	Email address is not plain
1303	E-mail Address	RFC 822 specifies a nowadays deprecated group format of the address, this detects that the address is in the deprecated format	Given Internet address is a group address
1304	E-mail Address	Empty string instead of e-mail address	Empty string instead of e-mail address
1401	Phone Number	Phone number starts with invalid country code and no region is specified	Phone number starts with invalid country code and no region is specified
1402	Phone Number	String cannot be a phone number	value specific
1403	Phone Number	String only appears to be a valid phone number	Invalid phone number
1420	Phone Number	Phone number doesn't match the required pattern	Phone number doesn't match the required pattern
1430	Phone Number	Empty string where phone number was expected	Empty string where phone number was expected
1500	Transform	Error occurred when executing rule code	value specific

Available rules

Available rules contain all available validation rules, Filter enabling fast access to particular items and list of Input and output metadata for easy use.

The available validation rules are furthermore categorized to Groups, If - then - else, Basic rules, String rules, Assignment rules, Custom rules and Imports.

	Tip
	The rule can be added into a list of active rules by double clicking on the rule in the list of available rules or by dragging and dropping from the list of available rules to desired place to tree of active rules.

Filter

To find desired available validation rule or metadata field, start typing its name into the filter input field. The rules and metadata fields are filtered on the fly.

Input and output metadata

Input metadata contains a list of input metadata fields. Data type of the field is shown in square brackets after the field name. Fields from metadata can be assigned to any active rule by dragging and dropping from the list of metadata onto the active rule.

Groups

The rules can be grouped together into rule groups. Each group of rules can have a user-defined name, the rule group including child rules can be enabled or disabled in the same way as a rule. The rule group can contain another rules or rule groups. Operator and Lazy evaluation settings can be set per rule group.

Validation result of a rule group will be computed from validation results of rules in this group and the selected Operator of the given group.

Operator: AND

All rules from a group need to be valid in order for the group of rules to be considered as valid.

Operator: OR

At least one rule from a group needs to be valid in order for the group of rules to be considered as valid.

Lazy evaluation: enabled

Lazy evaluation setting affects whether all rules will be evaluated in a given group or if evaluation should skip rules that cannot affect the validation result of the whole group.

Default value is enabled. Does not continue evaluating all rules in a given group once the result of the group is known. For example, as soon as a rule is evaluated as valid in an OR group, no more rules will be evaluated from this group because the result of the group is already known - group is valid.

Lazy evaluation: disabled

All rules in a given group will always be evaluated.

Error reporting

By default, multiple error records can possibly be produced for a single input record. Every rule evaluated as false will send one validation error record to the error output port. Every rule evaluated as false in an OR group will produce one validation error record. Every rule evaluated as false in an AND group with lazy evaluation disabled will produce one validation error record.

By changing the Produce error message settings from by rules to by group, each group will only produce one validation error record, even if more than one rule evaluated the validated record as invalid. Additionally, the Error message and Status code settings can be set to specify what values this record will contain.

	Note
	All groups is a root of tree of all validation rules. All above mentioned setting regarding groups are valid for root group in the same way.

If - then - else

The If - then - else enables you to validate fields conditionally.

The validation rule consists of condition and two subtrees of validation rules to check. If the condition is met, then the first subtree of validation rules is applied (the then branch). If the condition in not fulfilled, the second subtree of validation rules is applied (the else branch).

The condition can be a single rule or group of rules. The condition needs to return boolean value. If the condition contains only assignment rule(s) not returning boolean value, the execution of graph fails. The condition itself works as a group - it can contain more rules as a child nodes.

The conditionally processed validation subtrees work as groups too - zero, one or more validation rules or groups can be assigned to the then or else.

The Else branch is optional, it can be empty or omitted. The user can delete the Else if the else branch is not needed.

Figure 62.6. Validator - If - then - else without else branch

	Rule usage example
Input data contains fields type, weight and pieces. Type is type of cargo: bulk for bulk goods and piece for piece goods, weight is weight of cargo and pieces stands for number of pieces. If type is bulk, check that the field weight contains a numeric value and field pieces is empty. If type is not bulk check that the field pieces is a natural number and field weight is empty.

Rule usage example

Input data contains fields type, weight and pieces. Type is type of cargo: bulk for bulk goods and piece for piece goods, weight is weight of cargo and pieces stands for number of pieces.

If type is bulk, check that the field weight contains a numeric value and field pieces is empty. If type is not bulk check that the field pieces is a natural number and field weight is empty.

Compatibility

Version	Compatibility Notice
3.5.0-M2	Validator is available since 3.5.0-M2.
4.1.0	You can now use Strict validation parameter of Locale and format settings.