Version

    LDAPReader

    Short Description
    Ports
    Metadata
    LDAPReader Attributes
    Details
    Examples
    See also

    Short Description

    LDAPReader reads information from an LDAP directory converting it to CloverDX Data Records.

    ComponentData sourceInput portsOutput portsEach to all outputsDifferent to different outputsTransformationTransf. req.JavaCTLAuto-propagated metadata
    LDAPReaderLDAP directory tree11-n

    Ports

    Port typeNumberRequiredDescriptionMetadata
    Input0

    Input records used for defining base and filter.

    If the input port is connected then for each input record one query is assembled and sent to the LDAP server. If such query returns no result then one empty record is sent out (with autofilling fields populated); This behavior requires the input port to be connected.

    Any
    Output0

    For correct data records. Results of the search must have the same objectClass.

    Any[1]
    1-nFor correct data recordsOutput 0

    [1]  Metadata on the output must precisely describe the structure of the read object.

    Metadata

    LDAPReader does not propagate metadata.

    LDAPReader has no metadata template.

    Metadata on the output must precisely describe the structure of the read object. Only Clover fields of types string and byte/compressedByte are supported.

    Note that metadata field names have strict naming conventions; therefore, to map an LDAP attribute containing special characters (e.g. a dash) in its name, use a metadata field label. Metadata field labels can contain special characters and have a higher priority than field names. For example, to read from the msDS-PrincipalName LDAP attribute, use a field with label msDS-PrincipalName and any name that follows the naming convention (e.g. msDS_PrincipalName).

    Metadata can use Autofilling Functions. The autofilling attribute filename is set to complete the URL (includes base, filter).

    LDAPReader Attributes

    AttributeReqDescriptionPossible values
    Basic
    LDAP URLyesLDAP URL of the directory.ldap://host:port/
    Base DNyes

    Base Distinguished Name (the root of your LDAP tree) used for LDAP search. It is a comma separated list of attribute=value pairs referring to any location with the directory, e.g. if ou=Humans,dc=example,dc=com is the root of the subtree to be searched, entries representing people from example.com domain are to be found.

    Optional references to input record's fields in the form $field_name are resolved.

     
    Filteryes

    Filter used for the LDAP connection. attribute=value pairs as a filtering condition for the search. All entries matching the filter will be returned, e.g. mail=* returns every entry which has an email address, while objectclass=* is the standard method for returning all entries matching a given base and scope because all entries have values for objectclass.

    Optional references to input record's fields in the form $field_name are resolved.

     
    Scope 

    Scope of the search request.

    By default, only one object is searched.

    If onelevel, the level immediately below the distinguished name is searched.

    If subtree, the whole subtree below the distinguished name is searched.

    object (default) | onelevel | subtree
    Userno

    The user DN to be used when connecting to the LDAP directory. Similar to the following: cn=john.smith,dc=example,dc=com.

     
    PasswordnoThe password to be used when connecting to the LDAP directory. 
    Advanced
    Multi-value separatorno

    The character/string to be used when mapping multi-value attribute on simple Clover field as concatenation of string values.

    LDAPReader can handle keys with multiple values. These are delimited by this string or character. <none> is special escape value which turns off this functionality, then only the first value is read. This attribute can only be used for string data type. When byte type is used, the first value is the only one that is read.

    "|" (default) | other character or string
    Alias handling To control how aliases (leaf entries pointing to another object in the namespace) are dereferenced.always | never | finding (default)| searching
    Referral handling By default, links to other servers are ignored. If follow, the referrals are processed.ignore (default) | follow
    Page sizeno

    The size of the page used in paging. If >0 then LDAP server is queried in paging mode and this attribute defines how many records are returned on one page.

    e.g. 256
    All attributesno

    The query LDAP for all available attributes or only those directly mappable on output fields. When using defaultField then this should be set to True.

    True | False
    Default fieldno

    The name of the output field of type MAP(string) where attributes without explicit mapping (corresponding field names on the output port) will be stored.

    e.g. field15
    Binary attributesno

    The list of field names containing binary attributes

    By default, the objectGUID is added to the list of binary attributes.

    e.g. objectGUID
    LDAP Connection Propertiesno

    Java Property-like style of key-value definitions which will be added to LDAP connection environment.

     

    Details

    LDAPReader provides the logic to extract the search results and transform them into CloverDX Data Records. The results of the search must have the same objectClass.

    The metadata provided on the output port/edge (field names) are used when mapping from LDAP attributes to fields.

    Only string and byte (cbyte) CloverDX data fields are supported. String is compatible with most of LDAP usual types, byte is necessary; for example, for userPassword LDAP type reading.

    Multi-value attributes are mapped onto target fields in two ways:

    • if target field is of type List then individual values are stored as individual items.

    • If target field is simple type (and multiValueSeparator is set) then values are concatenated with the defined separator and stored as a single value.

    When the defaultMapping field is set (must be of type Map) then all unmapped attributes returned from LDAP server are stored in the map in a key->value manner. Multi-values are stored concatenated.

    Alias Handling

    Searching the entry to which an alias entry points is known as dereferencing an alias. Setting the Alias handling attribute, you can control the extent to which entries are searched:

    • always: Always dereference aliases.

    • never: Never dereference aliases.

    • finding: Dereference aliases in locating the base of the search but not in searching subordinates of the base.

    • searching: Dereference aliases in searching subordinates of the base but not in locating the base

    Examples

    Reading Data from LDAP
    Looking up a Record from LDAP
    Reading binary attributes

    Reading Data from LDAP

    Read records with uid=* from ou=people,dc=foo,dc=? subtree on foobar.com (port 389). Use credentials: user uid=Manager,dc=foo,dc=bar and password manager_password. The values for dc=? will be received from the input edge in the dc field.

    Solution
    AttributeValue
    LDAP URLldap://example.com:389
    Base DNou=people,dc=foo,dc=$dc
    Filteruid=*
    Scopesubtree

    Looking up a Record from LDAP

    Retrieve information about particular person identified by UID. The UID is received from the input edge. The information about persons is in cn=people,dc=uninett,dc=no subtree on LDAP server example.com (port 389).

    The metadata on output port has following fields: cn (string), displayName (string), mail (list of strings), uid (string), objectClass (list of strings), default (map of strings).

    Solution
    AttributeValue
    LDAP URLldap://example.com:389
    Base DNou=people,dc=example,dc=com
    Filteruid=$userId
    Scopesubtree

    The filter parameter contains a reference to the input field name userId. This reference will be resolved for all input records and LDAP query executed (and result parsed) for each input record.

    Reading binary attributes

    This example shows a way to read binary attributes from LDAP.

    Read the records from the Reading Data from LDAP example. In addition to the example, the records contain binary field objectGUID.

    Solution

    The output metadata of LDAPReader should contain a byte field for objectGUID.

    Use the Reformat and byte2hex function to convert the byte field to string.

    //#CTL2
    
    function integer transform() {
        $out.0.* = $in.0.*;
        $out.0.logonHours = byte2hex($in.0.logonHours);
    
        return ALL;
    }

    Similarly, you can use the byte2hex function with a prefix argument to get a hexadecimal string representation of the objectGUID attribute.

    String strObjectGUID = byte2hex($in.0.objectGUID,"\\");

    Best Practices

    • Improving search performance: If there are no alias entries in the LDAP directory that require dereferencing, choose Alias handling never option.

    Compatibility

    VersionCompatibility Notice
    4.1.0-M1LDAPReader now supports paging.
    4.4.1

    LDAPReader now allows users to read binary data from binary fields. New attributes Binary attributes and LDAP Connection properties are available.