Version

    JSONWriter

    Short Description
    Ports
    Metadata
    JSONWriter Attributes
    Details
    Examples
    Best Practices
    See also

    Short Description

    JSONWriter writes data in the JSON format.

    ComponentData outputInput portsOutput portsEach to all outputsDifferent to different outputsTransformationTransf. req.JavaAuto-propagated metadata
    JSONWriterJSON file1-n0-1
    yes
    no
    no
    no
    no
    no

    Ports

    Port typeNumberRequiredDescriptionMetadata
    Input0-NAt least oneInput records to be joined and mapped into the JSON structure.Any (each port can have different metadata)
    Output0
    no
    		Optional. For port writing. Only one field (byte, cbyte or string) is used. The field name is used in File URL to govern how the output records are processed - see Writing to Output Port

    Metadata

    JSONWriter does not propagate metadata.

    JSONWriter has no metadata template.

    JSONWriter Attributes

    AttributeReqDescriptionPossible values
    Basic
    File URLyes

    The target file for the output JSON. See Supported File URL Formats for Writers.

    		 
    Charset 

    The encoding of an output file generated by JSONWriter.

    The default encoding depends on DEFAULT_SOURCE_CODE_CHARSET in defaultProperties.

    		UTF-8 | <other encodings>
    Mapping[1]

    Defines how input data is mapped onto an output JSON. See Details.

    		 
    Mapping URL[1]External text file containing the mapping definition. 
    Advanced
    Create directories 

    By default, non-existing directories are not created. If set to true, they are created.

    		false (default) | true
    Omit new lines wherever possible 

    By default, each element is written to a separate line. If set to true, new lines are omitted when writing data to the output JSON structure. Thus, all JSON elements are on one line only.

    		false (default) | true
    Cache size 

    The size of the database used when caching data from ports to elements (the data is first processed then written). The larger your data is, the larger cache is needed to maintain fast processing.

    		auto (default) | e.g. 300MB, 1GB etc.
    Cache in Memory 

    Cache data records in memory instead of the JDBM's disk cache (default). Note that while it is possible to set the maximal size of the disk cache, this setting is ignored in case the in-memory cache is used. As a result, an OutOfMemoryError may occur when caching too many data records.

    		false (default) | true
    Sorted input 

    Tells JSONWriter whether the input data is sorted. Setting the attribute to true declares you want to use the sort order defined in Sort keys, see below.

    		false (default) | true
    Sort keys 

    Tells JSONWriter how the input data is sorted, thus enabling streaming. The sort order of fields can be given for each port in a separate tab. Working with Sort keys has been described in Sort Key.

    		 
    Records per file 

    The maximum number of records that are written to a single file. See Partitioning Output into Different Output Files

    		1-N
    Max number of records 

    The maximum number of records written to all output files. See Selecting Output Records.

    		0-N
    Partition key 

    The key whose values control the distribution of records among multiple output files. For more information, see Partitioning Output into Different Output Files.

    		 
    Partition lookup table 

    The ID of a lookup table. The table serves for selecting records which should be written to the output file(s). For more information, see Partitioning Output into Different Output Files.

    		 
    Partition file tag 

    By default, output files are numbered. If this attribute is set to Key file tag, output files are named according to the values of Partition key or Partition output fields. For more information, see Partitioning Output into Different Output Files.

    		Number file tag (default) | Key file tag
    Partition output fields 

    The fields of Partition lookup table whose values serve for naming output file(s). For more information, see Partitioning Output into Different Output Files.

    		 
    Partition unassigned file name 

    The name of a file that the unassigned records should be written into (if there are any). If it is not given, the data records whose key values are not contained in Partition lookup table are discarded. For more information, see Partitioning Output into Different Output Files.

    		 
    Create empty files 

    If set to false, prevents the component from creating an empty output file when there are no input records.

    		true (default) | false

    [1]  One of these has to be specified. If both are specified, Mapping URL has a higher priority.

    Details

    JSONWriter receives data from all connected input ports and converts records to JSON objects based on the mapping you define. Finally, the component writes the resulting tree structure of elements to the output: a JSON file, port or dictionary. JSONWriter can write lists.

    Every JSON object can contain other nested JSON objects. Thus, the JSON format resembles XML and similar tree formats.

    As a consequence, you map the input records to the output file in a manner similar to XMLWriter. Mapping editors in both components have similar logic. The very basics of mapping are:

    • Connect input edges to JSONWriter and edit the component's Mapping attribute. This will open the visual mapping editor:

      Mapping editor in JSONWriter after first open. Metadata on the input edge(s) are displayed on the left hand side. The right hand pane is where you design the desired JSON tree. Mapping is then performed by dragging metadata from left to right (and performing additional tasks described below).

      Figure 55.13.  Mapping editor in JSONWriter after first open. Metadata on the input edge(s) are displayed on the left hand side. The right hand pane is where you design the desired JSON tree. Mapping is then performed by dragging metadata from left to right (and performing additional tasks described below).


    • In the right hand pane, design your JSON tree consisting of

      • Elements

        [Important]Important

        Unlike XMLWriter , you do not map metadata to any attributes.

      • Arrays - arrays are ordered sets of values in JSON enclosed between the [ and ] brackets. To learn how to map them in JSONWriter, see the section called “Writing arrays II”.

      • Wildcard elements- another option to mapping elements explicitly. You use the Include and Exclude patterns to generate element names from respective metadata.

    • Connect input records to output (wildcard) elements to create Binding.

      Example 55.6. Creating Binding


      Example mapping in JSONWriter - employees are joined with projects they work on. Fields in bold (their content) will be printed to the output file - see below.

      Figure 55.14.  Example mapping in JSONWriter - employees are joined with projects they work on. Fields in bold (their content) will be printed to the output file - see below.


      Excerpt from the output file related to the figure above (example of one employee written as JSON): 

      "employee" : {
    "firstName" : "Jane",
    "lastName" : "Simson",
    "projects" : {
      "project" : {
        "name" : "JSP",
        "manager" : "John Smith",
        "start" : "06062006",
        "end" : "in progress",
        "customers" : {
          "customer" : {
            "name" : "Sunny"
          },
          "customer" : {
            "name" : "Weblea"
          }
        }
      },
      "project" : {
        "name" : "OLAP",
        "manager" : "Raymond Brown",
        "start" : "11052004",
        "end" : "31012006",
        "customers" : {
          "customer" : {
            "name" : "Sunny"
          }
        }
      }
    }
  },

    • At any time, you can switch to the Source tab and write/check the mapping yourself in code.

    • If the basic instructions found here are not satisfying, please consult XMLWriter's Details where the whole mapping process is described in detail.

    Examples

    Writing flat records as JSON
    Writing arrays I
    Writing arrays II
    Using wild cards
    Using templates

    Writing flat records as JSON

    This example shows a way to write flat records (no arrays, no subtrees) to a JSON file.

    The input edge connected to JSONWriter has metadata fields CommodityName, Unit, Price and Currency and receives the data: 

    Brent Crude Oil | Barrel | 75.36   | USD
Gold            | Ounce  | 1298.54 | USD
Silver          | Ounce  | 16.83   | USD

    Write the data to a JSON file.

    Solution

    Set up the File URL and Mapping attributes.

    AttributeValue
    File URL${DATAOUT_DIR}/comodities.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity  clover:inPort="0">
    <CommodityName>$0.CommodityName</CommodityName>
    <Unit>$0.Unit</Unit>
    <Price>$0.Price</Price>
    <Currency>$0.Currency</Currency>
  </Commodity>
</root>
    JSONWriter mapping

    Figure 55.15. JSONWriter mapping


    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Brent Crude Oil",
    "Unit" : "Barrel",
    "Price" : 75.36,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Unit" : "Ounce",
    "Price" : 1298.54,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Silver",
    "Unit" : "Ounce",
    "Price" : 16.83,
    "Currency" : "USD"
  }
}

    Writing arrays I

    This examples shows a way to write arrays.

    The input edge connected to the JSONWriter has metadata fields CommodityName, Unit, Price and Currency. It is similar to the previous example, but the price is not a single value but a list of values.

    Solution

    Set up the File URL and Mapping attributes.

    AttributeValue
    File URL${DATAOUT_DIR}/comodities2.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity clover:inPort="0">
    <CommodityName>$0.CommodityName</CommodityName>
    <Unit>$0.Unit</Unit>
    <clover:collection clover:name="Price">
      <item>$0.Price</item>
    </clover:collection>
    <Currency>$0.Currency</Currency>
  </Commodity>
</root>
    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Brent Crude Oil",
    "Unit" : "Barrel",
    "Price" : [ 75.36, 75.87 ],
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Unit" : "Ounce",
    "Price" : [ 1298.54, 1298.18 ],
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Silver",
    "Unit" : "Ounce",
    "Price" : [ 16.83, 16.80 ],
    "Currency" : "USD"
  },
}

    Writing arrays II

    This example shows a way to write summary array using values of all input records.

    Set up the File URL and Mapping attributes.

    Solution
    AttributeValue
    File URL${DATAOUT_DIR}/comodities3.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity clover:inPort="0">
    <CommodityName>$0.CommodityName</CommodityName>
    <Unit>$0.Unit</Unit>
    <Price>$0.Price</Price>
    <Currency>$0.Currency</Currency>
  </Commodity>
  <clover:collection clover:name="CommodityNames" clover:inPort="0">
    <CommodityName>$0.CommodityName</CommodityName>
  </clover:collection>
</root>
    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Brent Crude Oil",
    "Unit" : "Barrel",
    "Price" : 75.36,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Unit" : "Ounce",
    "Price" : 1298.54,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Silver",
    "Unit" : "Ounce",
    "Price" : 16.83,
    "Currency" : "USD"
  },
  "CommodityNames" : [ "Brent Crude Oil", "Gold", "Silver" ]
}

    Using wild cards

    This example shows a way to use wild cards to map input metadata fields.

    Write the data from the first example to a JSON file. The solution must be flexible - it must propagate the changes in input metadata to the output without changing the configuration of JSONWriter.

    Solution
    AttributeValue
    File URL${DATAOUT_DIR}/comodities4.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity clover:inPort="0">
    <clover:elements clover:include="$0.*"/>
  </Commodity>
</root>
    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Brent Crude Oil",
    "Unit" : "Barrel",
    "Price" : 75.36,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Unit" : "Ounce",
    "Price" : 1298.54,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Silver",
    "Unit" : "Ounce",
    "Price" : 16.83,
    "Currency" : "USD"
  }
}

    Using templates

    This example shows a way to write output elements names based on input data.

    Write the data from the first example to a JSON file. The name of the element containing the price of commodity should be the unit of measurement.

    Solution
    AttributeValue
    File URL${DATAOUT_DIR}/comodities5.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity clover:inPort="0">
    <CommodityName>$0.CommodityName</CommodityName>
    <clover:element clover:name="$0.Unit">$0.Price</clover:element>
    <Currency>$0.Currency</Currency>
  </Commodity>
</root>

    Notice the dummy element CommodityName which you bind the input field to.

    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Brent Crude Oil",
    "Barrel" : 75.36,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Ounce" : 1298.54,
    "Currency" : "USD"
  },
  "Commodity" : {
    "CommodityName" : "Silver",
    "Ounce" : 16.83,
    "Currency" : "USD"
  }
}

    More input streams

    This example shows a way to merge data from multiple input edges to a JSON file.

    There are two input edges. The records on the first one contain a commodity name and unit of measurement. The records on the second one contain a commodity name, price per unit and currency. Multiple records from the second input port can correspond to a single record from the first input port. Create a JSON file which contains record from the first input port and corresponding records from the second output port as a subtree.

    Solution
    AttributeValue
    File URL${DATAOUT_DIR}/comodities6.json
    Mapping
    <?xml version="1.0" encoding="UTF-8"?>
<root xmlns:clover="http://www.cloveretl.com/ns/xmlmapping">
  <Commodity clover:inPort="0">
    <clover:elements clover:include="$0.*"/>
      <clover:collection clover:name="Price">
        <Price clover:inPort="1"
               clover:key="CommodityName"
               clover:parentKey="CommodityName">
          <clover:elements clover:include="$1.*"
                           clover:exclude="$1.CommodityName"/>
        </Price>
    </clover:collection>
  </Commodity>
</root>
    Produced JSON File
    {
  "Commodity" : {
    "CommodityName" : "Silver",
    "Unit" : "Ounce",
    "Price" : [ {
      "PricePerUnit" : 17.81,
      "Currency" : "USD"
    } ]
  },
  "Commodity" : {
    "CommodityName" : "Gold",
    "Unit" : "Ounce",
    "Price" : [ {
      "PricePerUnit" : 1302.50,
      "Currency" : "USD"
    }, {
      "PricePerUnit" : 1300.00,
      "Currency" : "USD"
    } ]
  }
}

    Best Practices

    We recommend users to explicitly specify Charset.