Version

    JSONReader

    Short Description
    Ports
    Metadata
    JSONReader Attributes
    Details
    Examples
    Best Practices
    Compatibility
    See also

    Short Description

    JSONReader reads data in the Java Script Object Notation - JSON format, typically stored in a json file. JSON is a hierarchical text format where values you want to read are stored either in name-value pairs or arrays. Arrays are just the caveat in mapping - see Handling arrays. JSON objects are often repeated - that is why you usually map to more than one output port.

    ComponentData sourceInput portsOutput portsEach to all outputsDifferent to different outputsTransformationTransf. req.JavaCTLAuto-propagated metadata
    JSONReaderJSON file0-11-n

    Ports

    Port typeNumberRequiredDescriptionMetadata
    Input0Optional. For port reading.

    Only one field (byte or cbyte or string) is used. The field name is used in File URL to govern how the input records are processed - one of these modes: discrete, source or stream. See Reading from Input Port.

    Output0Successfully read records.Any.
    1-n

    Successfully read records.

    Connect additional output ports if your mapping requires that.

    Any. Each output port can have different metadata.

    Metadata

    Metadata Propagation

    JSONReader does not propagate metadata.

    Metadata Templates

    JSONReader has 2 templates on its output port: JSONReader_TreeReader_ErrPortWithoutFile and JSONReader_TreeReader_ErrPortWithFile.

    Table 55.7. JSONReader_TreeReader_ErrPortWithFile

    Field numberField nameData typeDescription
    1portintegerOutput port to which data would be sent if data is correct.
    2recordNumberinteger

    The number of the output record in which the error occurred. The number begins from 1 and is counted for each output record separately.

    3fieldNumberintegerAn index of the record field in which the error occurred. Starts from 1.
    4fieldNamestringThe name of the field which would contain the value if the value was correct.
    5valuestringValue causing the error.
    6messagestringError message
    7filestringInput file on which the error occurred.

    The metadata template JSONReader_TreeReader_ErrPortWithoutFile does not have the last field - file.

    Requirements on Metadata

    If the input port is used for reading data (discrete or stream), the input has to contain a byte, cbyte or string data type field.

    If the input port is used for reading URLs (source), the input metadata has to contain a string data type field.

    Each output port can have different metadata.

    Autofilling Functions

    Metadata on output port can use Autofilling Functions.

    JSONReader Attributes

    AttributeReqDescriptionPossible values
    Basic
    File URLyes

    Specifies which data source(s) will be read (a JSON file, dictionary or port). See Supported File URL Formats for Readers and Notes and Limitations.

     
    Charset 

    Encoding of records that are read. JSON automatically recognizes the family of UTF-* encodings (Auto). If your input uses another charset, explicitly specify it in this attribute yourself.

    Auto (default) | <other encodings>
    Data policy 

    Determines what should be done when an error occurs. For more information, see Data Policy.

    Strict (default) | Controlled[1 ] | Lenient
    Mapping URL[2 ]External text file containing the mapping definition. 
    Mapping[2 ]

    Mapping the input JSON structure to output ports. See Details.

     
    Implicit mapping 

    By default, you have to manually map JSON elements even to Clover fields of the same name. If you switch to true, JSON-to-CloverDX mapping on matching names will be performed automatically. That can save you a lot of effort in long and well-structured JSON files. See JSON Mapping - Specifics.

    false (default) | true

    [1 ] Controlled data policy in JSONReader sends error field values to error port if an edge with correct metadata is attached; records are written to the log otherwise.

    [2 ]  One of these has to be specified. If both are specified, Mapping URL has a higher priority.

    Details

    JSON Mapping - Specifics
    Handling arrays
    Notes and Limitations
    Mapping fields from input ports

    JSONReader takes the input JSON and internally converts it to DOM. Afterwards, you use XPath expressions to traverse the DOM tree and select which JSON data structures will be mapped to CloverDX records.

    DOM contains elements only, not attributes. As a consequence, remember that the XPath expressions will never contain @.

    Note that the whole input is stored in memory and therefore the component can be memory-greedy.

    There is a component JSONExtract reading JSON files using SAX. JSONExtract needs less memory than JSONReader.

    Mapping

    JSON is a representation for tree data as every JSON object can contain other nested JSON objects. Thus, the way you create JSONReader mapping is similar to reading XML and other tree formats. JSONReader configuration resembles XMLReader configuration. The basics of mapping are:

    • <Context> element chooses elements in the JSON structure you want to map.

    • <Mapping> element maps those JSON elements (selected by <Context>) to Clover fields.

    • Both use XPath expressions.

    You will see mapping instructions and examples when you edit the Mapping attribute for the first time.

    JSON Mapping - Specifics

    [Important]Important

    The first <Context> element of your mapping has a fixed format. There are only two ways how to set its xpath for the component to work properly:

    xpath="/root/object" (if root in JSON structure is an object)

    xpath="/root/array" (if root in JSON structure is an array)

    Example JSON:

    [
     { "value" : 1},
     { "value" : 2}
    ]

    JSONReader mapping:

    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <Context outPort="0" xpath="/root/array">
       <Mapping cloverField="cloverValue" xpath="value"/>
    </Context>

    (considering cloverValue is a field in metadata assigned to the output edge)

    Name-value pairs

    To read data from regular name-value pairs, first remember to set your position in the JSON structure to a correct depth - e.g. <Context xpath="zoo/animals/tiger">.

    Optionally, you can map the subtree of <Context> to the output port - e.g. <Context xpath="childObjects" outPort="2">.

    Do the <Mapping>: select a name-value pair in xpath. Next, send the value to CloverDX using cloverField; e.g.: <Mapping cloverField="id" xpath="nestedObject">.

    Example JSON:

    { 
      "property" : 1,
      "innerObject" : {
          "property" : 2
      }
    }

    JSONReader mapping:

    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <Context outPort="0" xpath="/root/object">
       <Mapping cloverField="property" xpath="property"/>
       <Context xpath="innerObject">
          <Mapping cloverField="propertyOfInnerObject" xpath="property"/>
       </Context>
    </Context>
    XPath expressions

    Remember that you do not use the @ symbol to access 'attributes' as there are none. In order to select objects with specific values you will write mapping similar to the following example:

    <Context xpath="//website[uri='http://www.w3.org/']" outPort="1"> 
       <Mapping cloverField="dateUpdated" xpath="dateUpdated" />
       <Mapping cloverField="title" xpath="title"/>
    </Context>

    The XPath in the example selects all elements website (no matter how deep in the JSON they are) whose URI matches the given string. Next, it sends its two elements (dateUpdated and title) to respective metadata fields on port 1.

    As has already been mentioned, JSON is internally converted into an XML DOM. Since not all JSON names are valid XML element names, the names are encoded. Invalid characters are replaced with escape sequences of the form _xHHHH where HHHH is a hexadecimal Unicode code point. These sequences must therefore also be used in JSONReader's XPath expressions.

    The XPath name() function can be used to read the names of properties of JSON objects (for a description of XPath functions on nodes, see https://www.w3schools.com/xml/xsl_functions.asp#node). However, the names may contain escape sequences, as described above. JSONReader offers two functions for this purpose, the functions are available from http://www.cloveretl.com/ns/TagNameEncoder namespace which has to be declared using the namespacePaths attribute, as will be shown below. These functions are the decode(string) function, which can be used to decode _xHHHH escape sequences, and its counterpart, the encode(string) function, which escapes invalid characters.

    For example, let's try to process the following structure:

    {"map" : { "0" : 2 , "7" : 1 , "16" : 1 , "26" : 3 , "38" : 1 }}

    A suitable mapping could look like this:

    <Context xpath="/root/object/map/*" outPort="0" namespacePaths='json-functions="http://www.cloveretl.com/ns/TagNameEncoder"'>
       <Mapping cloverField="key" xpath="json-functions:decode(name())" />
      <Mapping cloverField="value" xpath="." />
    </Context>

    The mapping maps the names of properties of "map" ("0", "7", "16", "26" and "38") to the field "key" and their values (2, 1, 1, 3 and 1, respectively) to the field "value".

    Implicit mapping

    If you switch the component's attribute Implicit mapping to true, you can save a lot of space because mapping of JSON structures to fields of the same name:

    <Mapping cloverField="salary" xpath="salary"/>

    will be performed automatically (i.e. you do not write the mapping code above).

    Handling arrays

    • Once again, remember that JSON structures are wrapped either by objects or arrays. Thus, your mapping has to start in one of the two ways (see JSON Mapping - Specifics):

      <Context xpath="/root/object">
      <Context xpath="/root/array">
    • Nested arrays - if you have two or more arrays inside each other, you can reach values of the inner ones by repeatedly using a single name (of the array on the very top). Therefore in XPath, you will write constructs like: arrayName/arrayName/.../arrayName depending on how many arrays are nested, for example:

      JSON:

      {
        "commonArray" : [ "hello" , "hi" , "howdy" ],
        "arrayOfArrays" : [ [ "val1", "val2", "val3"] , [""], [ "val5", "val6" ] ] 
      }

      JSONReader mapping:

      <?xml version="1.0" encoding="UTF-8" standalone="no"?>
      <Context xpath="root/object">
      
         <Context xpath="commonArray" outPort="0">
            <Mapping xpath="." cloverField="field1"/>
         </Context>
      
         <Context xpath="arrayOfArrays/arrayOfArrays" outPort="1">
            <Mapping xpath="." cloverField="field2"/>
         </Context>
      
      </Context>

      Notice the usage of dot in mapping. This is the only mapping which produces results you expect, i.e. on port 1:

      Example mapping of nested arrays - the result.

      Figure 55.17. Example mapping of nested arrays - the result.


    • Null and empty elements in arrays - in Figure 55.17, Example mapping of nested arrays - the result., you could notice that an empty string inside an array (i.e. [""]) populates a field with an empty string (record 4 in the figure).

      Null values (i.e. []), on the other hand, are completely skipped. JSONReader treats them as if they were not in the source.

    Mapping fields from input ports

    In mapping in JSONReader, you can use data from input edge too.

    <Context xpath="/root/object" outPort="0">
        <Mapping cloverField="my_field" inputField="field1"/>
    <Context>

    The content of field inputField is mapped to my_field. The input field mapping works in all three processing modes.

    Notes and Limitations

    • JSONReader reads data from JSON contained in a file, dictionary or port. If you are reading from a port or dictionary, always set Charset explicitly (otherwise you will get errors). There is no autodetection.

    • If your metadata contains the underscore '_', you will be warned. Underscore is an illegal character in JSONReader mapping. You should either:

      a) Remove the character.

      b) Replace it, e.g. with the dash '-'.

      c) Replace the underscore by its Unicode representation: _x005f.

    Examples

    Reading List of JSON Files

    You have a list of files with purchase orders.

    fileName |orderDate
    file1    |2014-12-17
    file2    |2014-12-19

    Each file has the following structure:

    {
        "orderID": 141,
        "firstname": "Ellen",
        "surname": "Doe",
        "products" :
        [
            { "product": "soap" },
            { "product": "petrol" }
        ]
    }

    Create a list having orderID, name, surname, orderDate and orderedProducts.

    Solution

    You have to connect input port to JSONReader to read file names and dates of order. The last field of output metadata (orderedProducts) is a list. Set up the following attributes of JSONReader:

    AttributeValue
    File URLport:$0.fileName:source
    CharsetUTF-8
    MappingSee the code below.
    Implicit mappingtrue

    If you read fileName from input port, you have to set up the Charset attribute. Using Implicit mapping is not mandatory but it can save space in Mapping.

    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <Context xpath="/root/object" outPort="0">
     	<Mapping cloverField="name" xpath="firstname"/>
     	<Mapping cloverField="orderDate" inputField="orderDate"/>
     	<Mapping cloverField="orderedProducts" xpath="products"/>
    </Context>

    Best Practices

    We recommend users to explicitly specify Charset.

    Compatibility

    VersionCompatibility Notice
    3.3.xJSONReader is available since 3.3.x.
    4.1.0-M1Input field in JSONReader can be mapped to output fields.