Version

    WebServiceClient

    Short Description
    Ports
    Metadata
    WebServiceClient Attributes
    Details
    Examples
    See also

    Short Description

    WebServiceClient calls a web-service. It sends incoming data record to a web-service and passes the response to the output ports if they are connected.

    WebServiceClient supports document/literal styles only.

    WebServiceClient supports only SOAP (version 1.1 and 1.2) messaging protocol with document style binding and literal use (document/literal binding).

    ComponentSame input metadataSorted inputsInputsOutputsEach to all outputsJavaCTLAuto-propagated metadata
    WebServiceClient-0-10-n

    Ports

    Port typeNumberRequiredDescriptionMetadata
    Input0For requestAny1(In0)
    Output0-N[1]For response mapped to these portsAny2(Out#)

    [1]  Response does not need to be sent to output if output ports are not connected.

    Metadata

    WebServiceClient does not propagate metadata.

    WebServiceClient has no metadata template.

    WebServiceClient Attributes

    AttributeReqDescriptionPossible values
    Basic
    WSDL URLyes

    A URL of the WSD server to which the component will connect. Connecting via a proxy server is available, too, e.g.: http:(proxy://proxyHost:proxyPort)//www.domain.com.

    e.g. http://wsf.cdyne.com/WeatherWS/Weather.asmx?wsdl
    Operation nameyes

    The name of the operation to be performed. See Details.

     
    Request Body structureyes

    A structure of the request that is received from the input port or written directly to the graph. For more information about request generation, see Details.

     
    Request Header structure 

    An optional attribute to Request Body structure. If not specified, automatic generation is disabled. For more information about request generation, see Details.

     
    Response mapping 

    A mapping of a successful response to output ports. The same mapping as in XMLExtract. For more information, see XMLExtract Mapping Definition.

     
    Fault mapping 

    A mapping of a fault response to output ports. The same mapping as in XMLExtract. For more information, see XMLExtract Mapping Definition.

     
    Namespace bindings 

    A set of name-value assignments defining custom namespaces. The namespace binding attribute is used only for Response Mapping and Fault Mapping.

    e.g. weather = http://ws.cdyne.com/WeatherWS/
    Use nested nodes 

    When true, all elements with the same name are mapped, no matter their depth in the tree. See example in Details.

    true (default) | false
    Security
    Username[1]A username to be used when connecting to the server. 
    Password[1]A password to be used when connecting to the server. 
    Auth Domain[1]

    An authentication domain. If not set, the NTLM authentication scheme will be disabled. Does not affect Digest and Basic authentication methods.

     
    Auth Realm[1]

    An authentication realm to which the specified credentials apply. If left empty, the credentials will be used for any realm. Does not affect NTLM authentication scheme.

     
    Key store[2]

    Path to the key store which contains the key pair for client certificate authentication. Leave empty to use the JVM default key store.

     
    Key store password[2]

    The password for the Key store.

     
    Key alias[2]

    Selects a key from the Key store. If not set, the first key will be used.

     
    Key password[2]

    The password for the selected client key. If not set, Key store password is used.

     
    Trust store[2]

    Path to the trust store which contains certificates of trusted servers and certification authorities. Leave empty to use the JVM default trust store.

     
    Trust store password[2]

    The password for the Trust store.

     
    Disable SSL Certificate Validation If true, the component ignores certificate validation problems for SSL connection.true | false (default)
    Advanced
    Request HTTP Headers HTTP Header(s) and their values to be added to HTTP request headers. 
    Response HTTP Headers  HTTP header(s), that will be read from the HTTP response. You can map the headers in Response mapping to output metadata fields.  
    Timeout (ms) 

    Timeout for the request; by default in milliseconds, but other time units may be used.

     
    Override Server URL 

    Specifies a URL that should be used for the requests instead of the one specified in WSDL definition.

     
    Override Server URL from field 

    Specifies a field containing a URL that should be used for the requests instead of the one specified in WSDL definition.

     

    [1]  See Authentication section for more details.

    [2]  Available since release 5.7.

    Details

    After sending your request to the server, WebServiceClient waits up to 10 minutes for a response. If there is none, the component fails on error.

    If you switch log level to DEBUG, you can examine the full SOAP request and response in a log. This is useful for development and issue investigation purposes.

    Operation name opens a dialog, depicted in the figure below, in which you can select a WS operation by double clicking on one of them. Operations not supporting the document style of the input message are displayed with a red error icon.

    Choosing WS operation name in WebServiceClient.

    Figure 63.7. Choosing WS operation name in WebServiceClient.


    Request Body structure and Request Header structure - open a dialog showing the request structure. The Generate button generates the request sample based on a schema defined for the chosen operation. The Customized generation... option in the button's drop-down menu opens a dialog which helps to customize the generated request sample by allowing to select only suitable elements or to choose a subtype for an element.

    Example 63.3. Use nested nodes example

    Mapping

    <?xml version="1.0" encoding="UTF-8"?>
    <Mappings>
        <Mapping element="request">
            <Mapping element="message" outPort="0" />
        </Mapping>
    </Mappings>

    applied to

    <?xml version="1.0" encoding="UTF-8"?>
    <request>
        <message>msg1</message>
        <operation>
            <message>msg2</message>
        </operation>
    </request>

    produces:

    • msg1 and msg2 with Use nested nodes switched on (default behavior)

    • msg1 with Use nested nodes switched off. In order to extract msg2, you would need to create an explicit <Mapping> tag (one for every nested element).


    Authentication

    If authentication is required by the web service server, the Username, Password and, in the case of NTLM authentication, Auth Domain component properties need to be set.

    There are currently three authentication schemes supported: NTLM, Digest and Basic. NTLM is the most secure while Basic is the least secure of these methods. The server advertises which authentication methods it supports and WebServiceClient automatically selects the most secure one.

    Auth Realm can be used to restrict the specified credential only to a desired realm, in case Basic or Digest authentication schema is selected.

    [Note]Note

    Auth Domain is required by the NTLM authentication. If it is not set, only Digest and Basic authentication schemes will be enabled.

    In case server requires NTLM authentication, but Auth Domain is left empty, you will get errors like these in graph execution log:

    • ERROR [Axis2 Task] - Credentials cannot be used for NTLM authentication: org.apache.commons.httpclient.UsernamePasswordCredentials

    • ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 finished with status: ERROR caused by: org.apache.axis2.AxisFault: Transport error: 401 Error: Unauthorized

    Also note that it is not possible to specify the domain as part of the Username in form of domain\username as is sometimes customary. The domain name has to be specified separately in the Auth Domain component property.

    Special Characters in Request Body

    Special characters, e.g. < that appear in a request body should be typed as entities (&gt;). Otherwise < would be interpreted as a beginning of a new xml element.

    Examples

    Getting Echo from CloverDX Server

    CloverDX Server provides a webservice API to get status or perform operations. Send echo request to CloverDX Server and get the response. The server listens on 127.0.0.1 on TCP port 38080.

    Solution

    Use the WSDL URL, Operation name, Request Body structure and Response mapping attributes.

    Set WSDL URL to http://127.0.0.1:38080/clover/webservice?wsdl.

    In Operation name choose the echo operation.

    In Request Body structure, use Generate in the upper left corner and then fill in the string to be echoed.

    In Response mapping, map the out element to any output metadata field. The output port has to be attached, otherwise the output cannot be mapped.

    Compatibility

    VersionCompatibility Notice
    5.7.0

    You can now specify Key store, Key store password, Key alias, Key password, Trust store and Trust store password.